AK47 7.62 Flat With Trunnion Holes

Be the first to review this product

Availability: In stock

$27.95
OR
Quick Overview
AK47 7.62 Flat With Trunnion Holes

AK47 7.62 Flat With Trunnion Holes

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • AK47 7.62 Flat With Trunnion Holes

Details

The front and rear trunnion holes on these flats are pre-punched to help with the installation of the trunnions.  In some cases the front trunnion rivet holes may not line up do to how the factories drilled the holes in the trunnions.
 

  • Receiver flat thickness= 1mm (.040")
  • Material 4130 Annealed
  • Comes with bolt guide rails
  • Rails and flat need to be heat treated after bending


Reccomended rivets and center support (not included with flat)

  • AKM Fixed Stock Rivet Set
  • 1mm Center Support

Alignment Hole Option

If you are using my new bending die you DO NOT need the alignment holes.  The alignment holes are for the outdated bending tools.

 

To use these flats you will need to have a 5mm and 7mm reamer.  The physics of bending sheet metal make it next to impossible to have a bend close to a hole without distorting.  To solve this the holes on the flat are undersized and need to be reamed to size after bending.  Look at the receiver flat instruction page to see more info.

The rails that will come with the flats are pictured below. They have mag stabilizers on both rails to keep the mag from tilting and causing feed problems.  Before installing the rails you will need to trim the mag stabilizers to match the caliber of flat you are using.

 

AK RECEIVER LOER BOLT GUIDE RAILS

Additional Information
SKU 791663444

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.